- Clone
- UCHL1 (See other available formats)
- Regulatory Status
- RUO
- Workshop
- IV N31
- Other Names
- CD45RO
- Isotype
- Mouse IgG2a, κ
- Barcode Sequence
- TATAGTTCACGCCTC
- Ave. Rating
- Submit a Review
- Product Citations
- publications
Cat # | Size | Price | Quantity Check Availability | Save | ||
---|---|---|---|---|---|---|
304269 | 10 µg | £253 |
CD45RO is a 180 kD single chain membrane glycoprotein. It is a splice variant of tyrosine phosphatase CD45, lacking the A, B, and C determinants. The CD45RO isoform is expressed on activated and memory T cells, some B cell subsets, activated monocytes/macrophages, and granulocytes. CD45RO enhances both T cell receptor and B cell receptor signaling mediated activation. CD45 and its isoforms non-covalently associate with lymphocyte phosphatase-associated phosphoprotein (LPAP) on T and B lymphocytes. CD45 has been reported to be associated with several other cell surface antigens including CD1, CD2, CD3, and CD4. CD45 has also been reported to bind galectin-1 and CD22. CD45 isoform expression can change in response to cytokines.
Product DetailsProduct Details
- Verified Reactivity
- Human
- Reported Reactivity
- Chimpanzee, Cynomolgus, Common Marmoset
- Antibody Type
- Monoclonal
- Host Species
- Mouse
- Immunogen
- IL-2 dependent T cell line, CA1
- Formulation
- Phosphate-buffered solution, pH 7.2, containing 0.09% sodium azide and EDTA
- Preparation
- The antibody was purified by chromatography and conjugated with TotalSeq™-Bn oligomer under optimal conditions.
- Concentration
- 0.5 mg/mL
- Storage & Handling
- The antibody solution should be stored undiluted between 2°C and 8°C. Do not freeze.
- Application
-
SB - Quality tested
- Recommended Usage
-
Each lot of this antibody is quality control tested by immunofluorescent staining in formalin-fixed, paraffin-embedded (FFPE) lymphoid tissue, and the oligomer sequence is confirmed by sequencing. TotalSeq™-Bn antibodies are compatible with the 10x Visium CytAssist Gene and Protein Expression Assay.
To maximize performance, it is strongly recommended that the reagent be titrated for each application, and that you centrifuge the antibody dilution at 14,000xg at 2 − 8°C for 10 minutes before use. Carefully pipette out the liquid avoiding the bottom of the tube when handling. To determine and optimize dilutions for the addition of Totalseq™-Bn antibodies into pre-designed antibody panels, refer to 10x Genomics Custom Add-on Antibody Optimization guide.
Buyer is solely responsible for determining whether Buyer has all intellectual property rights that are necessary for Buyer's intended uses of the BioLegend TotalSeq™ products. For example, for any technology platform Buyer uses with TotalSeq™, it is Buyer's sole responsibility to determine whether it has all necessary third party intellectual property rights to use that platform and TotalSeq™ with that platform. - Application Notes
-
The UCHL1 antibody is commonly used in combination with antibodies against CD45RA to discern memory and naïve T cells. Additional reported applications (for the relevant formats) include: immunohistochemical staining of acetone-fixed frozen tissue sections5 and formalin-fixed paraffin-embedded tissue sections4, Western blotting2, and immunoprecipitation3.
- Additional Product Notes
-
TotalSeq™-Bn reagents are designed to profile protein levels following an optimized protocol in spatial transcriptomics. Compatible spatial biology devices (e.g. Imaging System, 10x Genomics Visium Spatial CytAssist Gene and Protein Expression instruments and reagents) and sequencer (e.g. Illumina analyzers) are required. TotalSeq™-B reagents are not compatible with the 10x Genomics Visium system. The complete barcode sequence may be provided upon request. Please contact technical support for more information, or visit TotalSeq™-Bn Reagents for 10x Genomics Visium CytAssist Gene and Protein Assay.
-
Application References
(PubMed link indicates BioLegend citation) -
- Knapp W, et al. Eds. 1989. Leucocyte Typing IV. Oxford University Press. New York. (FC)
- Ishii T, et al. 2001. P. Natl. Acad. Sci. USA 98:12138. (WB)
- Ponsford M, et al. 2001. Clin. Exp. Immunol. 124:315. (IP)
- Yamada M, et al. 1996. Stroke 27:1155. (IHC)
- Sakkas LI, et al. 1998. Clin. Diagn. Lab. Immunol. 5:430. (IHC)
- Baba N, et al. 2010. Int. Immunol. 22:237. PubMed
- Thakral D, et al. 2008. J. Immunol. 180:7431. (FC) PubMed
- Weiss L, et al. 2010. P. Natl. Acad. Sci. USA 107:10632. PubMed
- Wu YY, et al. 2007. Infect. Immun. 75:4357. PubMed
- Mozaffarian N, et al. 2008. Rheumatology 47:1335. PubMed
- Roque S, et al. 2007. J. Immunol. 178:8028. PubMed
- Yoshino N, et al. 2000. Exp. Anim. (Tokyo) 49:97. (FC)
- Smith SH, et al. 1986. Immunology 58:63. (Immunogen)
- Peterson VM, et al. 2017. Nat. Biotechnol. 35:936. (PG)
- RRID
-
AB_3083169 (BioLegend Cat. No. 304269)
Antigen Details
- Structure
- Tyrosine phosphatases, type I transmembrane, 180 kD (isoform of CD45 containing none of the A, B, or C determinants)
- Distribution
-
Activated and memory T cells, B cell subsets, monocytes, macrophages, granulocytes
- Function
- Enhances TCR and BCR signaling
- Ligand/Receptor
- CD22
- Cell Type
- B cells, Granulocytes, Macrophages, Mesenchymal Stem Cells, Monocytes, T cells, Tregs
- Biology Area
- Cell Biology, Immunology, Inhibitory Molecules, Neuroscience, Neuroscience Cell Markers, Stem Cells
- Molecular Family
- CD Molecules
- Antigen References
-
1. Thomas M. 1989. Annu. Rev. Immunol. 7:339.
2. Trowbridge I, et al. 1994. Annu. Rev. Immunol. 12:85. - Gene ID
- 5788 View all products for this Gene ID
- UniProt
- View information about CD45RO on UniProt.org
Related Pages & Pathways
Pages
Related FAQs
- If an antibody clone has been previously successfully used in IBEX in one fluorescent format, will other antibody formats work as well?
-
It’s likely that other fluorophore conjugates to the same antibody clone will also be compatible with IBEX using the same sample fixation procedure. Ultimately a directly conjugated antibody’s utility in fluorescent imaging and IBEX may be specific to the sample and microscope being used in the experiment. Some antibody clone conjugates may perform better than others due to performance differences in non-specific binding, fluorophore brightness, and other biochemical properties unique to that conjugate.
- Will antibodies my lab is already using for fluorescent or chromogenic IHC work in IBEX?
-
Fundamentally, IBEX as a technique that works much in the same way as single antibody panels or single marker IF/IHC. If you’re already successfully using an antibody clone on a sample of interest, it is likely that clone will have utility in IBEX. It is expected some optimization and testing of different antibody fluorophore conjugates will be required to find a suitable format; however, legacy microscopy techniques like chromogenic IHC on fixed or frozen tissue is an excellent place to start looking for useful antibodies.
- Are other fluorophores compatible with IBEX?
-
Over 18 fluorescent formats have been screened for use in IBEX, however, it is likely that other fluorophores are able to be rapidly bleached in IBEX. If a fluorophore format is already suitable for your imaging platform it can be tested for compatibility in IBEX.
- The same antibody works in one tissue type but not another. What is happening?
-
Differences in tissue properties may impact both the ability of an antibody to bind its target specifically and impact the ability of a specific fluorophore conjugate to overcome the background fluorescent signal in a given tissue. Secondary stains, as well as testing multiple fluorescent conjugates of the same clone, may help to troubleshoot challenging targets or tissues. Using a reference control tissue may also give confidence in the specificity of your staining.
- How can I be sure the staining I’m seeing in my tissue is real?
-
In general, best practices for validating an antibody in traditional chromogenic or fluorescent IHC are applicable to IBEX. Please reference the Nature Methods review on antibody based multiplexed imaging for resources on validating antibodies for IBEX.
Other Formats
View All CD45RO Reagents Request Custom ConjugationCompare Data Across All Formats
This data display is provided for general comparisons between formats.
Your actual data may vary due to variations in samples, target cells, instruments and their settings, staining conditions, and other factors.
If you need assistance with selecting the best format contact our expert technical support team.
-
APC anti-human CD45RO
-
FITC anti-human CD45RO
-
PE anti-human CD45RO
-
PE/Cyanine5 anti-human CD45RO
-
Purified anti-human CD45RO
-
Alexa Fluor® 488 anti-human CD45RO
-
Pacific Blue™ anti-human CD45RO
-
Alexa Fluor® 700 anti-human CD45RO
-
Biotin anti-human CD45RO
-
Brilliant Violet 421™ anti-human CD45RO
-
PerCP/Cyanine5.5 anti-human CD45RO
-
Brilliant Violet 570™ anti-human CD45RO
-
Brilliant Violet 605™ anti-human CD45RO
-
APC/Cyanine7 anti-human CD45RO
-
PE/Cyanine7 anti-human CD45RO
-
Brilliant Violet 650™ anti-human CD45RO
-
Brilliant Violet 711™ anti-human CD45RO
-
Brilliant Violet 785™ anti-human CD45RO
-
Alexa Fluor® 594 anti-human CD45RO
-
Purified anti-human CD45RO (Maxpar® Ready)
-
Brilliant Violet 510™ anti-human CD45RO
-
PE/Dazzle™ 594 anti-human CD45RO
-
APC/Fire™ 750 anti-human CD45RO
-
PerCP anti-human CD45RO
-
APC anti-human CD45RO
-
TotalSeq™-A0087 anti-human CD45RO
-
TotalSeq™-B0087 anti-human CD45RO
-
TotalSeq™-C0087 anti-human CD45RO
-
Brilliant Violet 750™ anti-human CD45RO
-
PE/Fire™ 640 anti-human CD45RO
-
TotalSeq™-D0087 anti-human CD45RO
-
Spark Violet™ 423 anti-human CD45RO
-
GMP APC anti-human CD45RO
-
PE anti-human CD45RO
-
TotalSeq™-Bn1369 anti-human CD45RO
-
GMP PE anti-human CD45RO
-
Spark UV™ 387 anti-human CD45RO
-
APC/Fire™ 810 anti-human CD45RO
Follow Us